Chapter 1 Product Overview 1 27 LED LCD Printer Status Description (Power) LED Status LED Pause LED Paper LED Ink LED ● - ● - - PAUSE * * * * * Pause When the Pause button is pushed during printing, the printer becomes this status. It is possible to go to the setting mode from this state. ● ✓ - - - MENU * * * * * Menu When the Menu button is pushed, the printer becomes this status. ● - ● - - CANCELING JOB * * * * * Canceling the jobs When the Cancel button is pushed during printing, print jobs are canceled, printing is interrupted and print data inside the printer are deleted.
● ● - - - PRINTING-NOZZLE CHECK DISABLED * * * * * Nozzle Verification Tech- nology is disable (*1) When dot dropouts cannot be detected due to low environmental temperature, the LCD display shows a message. Print- ing continues. ● ● - - - NOZZLE CLOGGED * * * * * Unrecoverable nozzle dropouts happen (*1) This display is shown when unrecover- able nozzle dropouts happen. Printing continues. ● ● ● - - NOZZLE CLOGGED CHECK THE PRINT PRESS PAUSE TO CONTINUE Nozzle clogged (*1) Printing is paused temporarily, since noz- zle dropouts happened during printing. Printing restarts when the Pause button is pushed.
When canceling printing, push and hold the CANCEL button for two sec- onds or more before pushing the Pause button. button and button switch the LCD display. ● ▼ ● - - ROLL COVER OPEN * * * * * Roll paper cover open (*1) The Roll paper cover is open. ● ▼ ● - - FRONT COVER OPEN * * * * * Front cover open (*1) The Front cover is open. ● ▼ ● - - PAPER COVER OPEN * * * * * Paper cover open (*1) The Paper set cover is open. ● ▼ ● - ● MAINTENANCE BOX COVER OPEN * * * * * Maintenance box cover open error (*1) The Maintenance box cover is open. ● ▼ ● - ● INK CARTRIDGE COVER OPEN * * * * * Ink cartridge cover open error (*1) The Ink cartridge cover is open.
● ▼ ● ● - MEDIA DETECTION ERROR * * * * * Media detection error (*1) The printer media detector's setting and the media in the printer are different. button can be used to move to the setting mode and set the media detector.