Chapter 4 Advanced Usage Power supply SW setting • Enabled (initial setting) • Disabled Refer to "Precautions when Developing Applications" on page 117 for precautions on using the “Power supply SW setting”. Pre-feed before next print Selectable from 0 dot (disabled), 1 dot, 2 dot, 3 dot, 4 dot, 5 dot, and 6 dot. Initial setting: 2dot Paper initialization when power ON • Enabled (initial setting) • Disabled Periodic time of paper initialization Selectable from “Disabled” and 1 to 720 minutes Initial setting:
720 minutes Black mark control • Disabled (initial setting) • Enabled Setting the conditions that cancel the receive buffer BUSY state • Cancels the BUSY state when the remaining capacity of the receive buffer reaches 256 bytes (initial setting) • Cancels the BUSY state when the remaining capacity of the receive buffer reaches 138 bytes 90