Chapter 4 Advanced Usage Setting/Check Modes As well as print mode, the following modes are also provided for making various printer settings and checking items. • Self-test mode • NV graphics information print mode • Receipt Enhancement information print mode • Software settings mode • Restore default values mode • Interface setup mode • Hexadecimal dumping mode The self-test mode or hexadecimal dumping mode is selected depending on the operation performed when the power is turned on.
NV graphic information print mode, Receipt Enhancement information print mode, Software settings mode, and Restore default settings mode are selected depending on the Feed button operation performed during a self-test. Close the roll paper cover, and turn on the printer while pressing the Feed button. Self-test Briefly press the Feed button. Hold down the Feed button. Continuing the self-test Mode selection guidance Press the Feed button seven times briefly and then hold it down. Press the Feed button once briefly and then hold it down. Press the Feed button four times briefly and then hold it down.
NV Graphics Information Restore Default Values Peripheral Device Information print Open the roll paper cover, and turn on the printer while pressing the Feed button, and then close the roll paper cover. Hexadecimal dumping 91 Press the Feed button twice briefly and then hold it down. Press the Feed button three times briefly and then hold it down. Receipt Enhancement Information Software Settings Press the Feed button five times briefly and then hold it down. ress the Feed button five times briefly and Press the Feed button six times briefly and then hold it down. Interface Setup TM-Intelligent settings information print