Power Functions You can customize the printer using the power functions, the auto-power off function and battery charge mode function to save the battery power or minimize the battery deterioration. Auto-Power Off The printer turns off the power automatically after the specified amount of time elapses in the power saving sta- tus. The auto-power off function is initially disabled. (The auto-power off time is set to 0.) The auto-power off time is selectable with the customized value. To set the customized value, see "Software Settings" on page 42 . The printer acts differently when connected to the AC adapter depending on the battery charge mode.
The printer has two modes and is initially set to the mode 1. The battery charge mode is selectable with the customized value. To set the customized value, see "Software Settings" on page 42 . Mode 1 In the mode 1, the printer charges the battery even if the battery is fully charged. Mode 2 In the mode 2, the printer charges the battery when the remaining battery charge is less than fully charged. 18 Battery Charge Modes