Chapter 1 Product Overview Error Status When an error occurs, the printer stops operating, goes offline, and the Error LED flashes. There are three possible error types: automatically recoverable errors, recoverable errors, and unrecoverable errors. Automatically Recoverable Errors Printing is no longer possible when automatically recoverable errors occur. They can recover easily, as described 1 21 below. Error LED flash code Error Error description Recovery measure Temperature The temperature of the Recovers automatically error print head, motor driver when the temperature IC, or battery is high. goes down. Recoverable Errors Printing is no longer possible when recoverable errors occur.
They can be recovered easily by turning the power off and then on again or sending an error recovery command after eliminating the cause of the error. Error LED flash code Error Error description Recovery measure Autocutter Autocutter does not work Send the error recovery error correctly. command, or turn the power off and on to recover. The error recovery command is valid only if a recoverable error (excluding automatically recover- able errors) occurs. Error Error description Error LED flash code Recovery measure Temperature error The temperature of the print head, motor driver IC, or battery is high. Recovers automatically when the temperature goes down.
Error Error description Error LED flash code Recovery measure Autocutter error Autocutter does not work correctly. Send the error recovery command, or turn the power off and on to recover.