Chapter 2 Setup 8 The “Connection complete” window appears. Click [Test Buzzer] or [Test Printing] to check operation. 9 Click [Back to Main screen] to return to the main window. 10 Click the “x” button of TM Bluetooth ® Connector to exit. • If “Error” is displayed when you click the [Search] on the TM Bluetooth ® Connector, check whether: • The Bluetooth adapter is installed to the computer. • Bluetooth is ON in the Windows settings. • If the device is not displayed on the TM Bluetooth ® Connector or the TM Bluetooth ® Connector Status shows “ ” after pairing. Check whether: • The printer is not turned on. Turn on the printer. Confirm that the battery is properly loaded in the printer.
• The printer is 10 m or further away from the computer. • Confirm that there is no other wireless device, such as a microwave oven and cordless tele- phone, that can interfere with the Bluetooth printer. • If the printer and the computer are placed in different rooms separated by a wall, move the printer and/or the computer in the same room. • The printer may not be detected when the search time is short. Try search again with longer search time. • While a computer and printer are communicating, the printer cannot be detected by other computers. Confirm that the printer to be detected is not communicating with any com- puter.
2 41 Printing method Port name APD print queue ESDPRTxxx (TM-P60II: Queue name) UPOS ESDPRTxxx (UPOS for TM-P60II) ESC/POS command Displayed virtual COM port (e.g. COM4)