Chapter 3 Advanced Usage Command execution during offline When this function is enabled, you can execute specified commands even if the printer is offline due to speci- fied causes. • Enabled (initial setting) • Disabled Autocutting at roll paper cover close • Cuts (initial setting) • Does not cut Automatic paper reduction • Extra upper space reduction: disabled (initial setting) or enabled • Extra lower space reduction: disabled (initial setting) or enabled • Line space reduction rate: not reduced (initial setting), 25%, 50%, or 75% • Line feed reduction rate: not reduced (initial setting), 25%, 50%, or 75% • Barcode height reduction rate:
not reduced (initial setting), 25%, 50%, or 75% 3 • Paper reduction is not performed for space dot lines of graphics printing data. • When reducing barcode height, be sure to check reading a barcode with your barcode reader in advance. Automatic power off time Selectable from 1 to 60 minutes. (initial setting: Disabled) When using the USB interface, this functions is disabled even if the time is set. For detailed information, see "Auto-Power Off" on page 18 . Battery charge mode • Mode 1 (initial setting) • Mode 2 For detailed information about the battery charge mode, see "Battery Charge Modes" on page 18 . 45