Printing and Cutting Positions Manual-cutter position Approx. 6.4 mm Approx. 10.9 mm Auto-cutter blade position Center of the print dotline Paper feed direction • The values above may vary slightly as a result of paper slack or variations in the paper. Take this into account when setting the cutting position of the auto-cutting. • Paper feeding (approx. 1 mm) is performed automatically before first-time printing after autocutting in order to prevent character deformation. Due to this, be aware that there is approximately a 1 mm space added to the peripheral area 6.4 mm after the autocutting point when continuous printing is performed. 80