Paper Specifications Roll Paper • Use of roll paper whose end is glued to the core is prohibited. • Use of thermal paper with a pre-printed recording surface should be avoided. Using it can cause the thermal head to stick to the thermal paper surface during printing, and cause printing fail- ure and other problems. The pre-printing also can result in reduced print density.
Using thermal paper with a pre-printed recording surface, pre-printing should be done in accordance with the conditions (ink type, printing and other conditions) recommended by the paper manufacturer, and the thermal paper should be checked to ensure that there is no faulty printing, loss of print density, or other problems. 100 Paper type Thermal paper Size Roll diameter Core Take-up width Paper width Ø83 mm maximum Inner diameter: Ø12 mm Outer diameter: Ø18 mm Width: Same as the paper width, or within 1 mm of the paper width 80 + 0.5 / - 1.0 mm 79.5 ± 0.5 mm Original pape r type NTP080-80 [Original paper type: TF50KS-E Nippon Paper Industries Co., Ltd.] Japan: Nakagawa Mfg. Co., Ltd.
North America: Nakagawa Mfg. (USA), Inc. Europe: Nakagawa Mfg. (EUROPE), GmbH. Southeast Asia: N.A.K. Mfg. (Malaysia) SDN BHD Specified origi- nal paper type TF50KS-EY, TF50KS-E (Nippon Paper Industries Co., Ltd.) PD160R, PD190R (Oji Paper Co., Ltd.) P220AGB-1 (Mitsubishi Paper Mills Limited) AF50KS-E (Jujo Thermal Oy) F5041(55), F5041(48) (Mitsubishi HiTec) KT55FA, KT48FA (Koehler Paper Group) P30521, P30523, P31523, P35524 (Kanzaki Specialty Papers)