Cut Sheet • When the print start position is based on the leading edge of the paper Printable area 50.8 mm 18 mm 5 to 10 mm Default setting: 5 mm *1 Cut sheet insertion direction 10 mm ∗1: If the firmware version is before 5.03 ESC/POS, it is fixed at 10 mm. • When the print start position is based on the trailing edge of the paper Printable area 50.8 mm 18 mm 60.8 mm 10 mm Cut sheet insertion direction The area that starts 40 mm from the end of the paper is printable, but the printing may be disor- dered. 102