Chapter 3 Advanced Product Use R/E Information Print Mode This mode prints the receipt enhancement information below, which is registered on the product. • Auto Top Logo setting • Auto Bottom Logo setting • Auto Top Logo/auto Bottom Logo extended settings Perform the procedures below. 1 Turn off the product and open the roll paper cover. 2 While holding down Button 2, press the (POWER) button to turn on the product. 3 3 4 This starts R/E (receipt enhancement) information printing. Initialization starts after printing is complete. Next, the product transitions to its normal state (print- ing/scanning enabled). 59 utton 2 four times. he roll paper cover. ON +