Software Setting Mode Use this mode to configure settings for the product's memory switches and customize values. • Roll paper print density • Auto paper use reduction • Paper auto cutting after closing the roll paper cover • Error operation setting • Transmits the power ON information • Communication settings For details on memory switches and customize values, refer to “Software Settings” on page 47 . Perform the procedures below. 1 Turn off the product and open the roll paper cover. 2 While holding down Button 2, press the (POWER) button to turn on the product. 3 vided. When your finish configuring settings, they are saved to the product and initialization starts.
Next, the product transitions to its normal state (printing/scanning enabled). 60 he roll paper cover. ints software setting ON + mode guidance. Follow the instructions th