‹ Standard Connection Diagrams Standard MxC connection diagrams are shown in Fig 2.6. These are the same for both 200 V class and 400 V class MxCs. The connections depend on the MxC capacity. „ CIMR-ACA25P5 to 2022, 45P5 to 4022 p1 ∗ 1 n1 ∗ 1 r2 ∗ 2 s2 ∗ 2 t2 ∗ 2 R/L1 U/T1 S/L2 V/T2 IM T/L3 W/T3 3-phase 200 VAC (400 VAC) Note: Control power is supplied internally from the main circuit power supply for all MxC models. * 1. Connect the Momentary Power Loss Compensation unit. * 2. Normally not used. * 1, * 2 Do not connect power to these terminals. Fig 2.6 Main Circuit Terminal Connections 2- 9