9. Press the SET button to confirm the voltage value and enter the current setup, then press + or - to adjust the current value to what you need if it is possible. 10. Press the START/STOP button to begin charging. The Working Indicator light will turn solid green during the charging process. When the charging finishes, the Working Indicator light will be OFF. TIP: * Press the START/STOP button to stop/start charging if needed. * Press and hold the SET button for 1.5 seconds to change the charging mode if necessary. 11. Press the Power Button to turn off the charger. The Power Indicator light will be OFF in 5 seconds, and the display will turn off.
To store or put away, unplug the power plug and keep the charger in a well-ventilated and dry place.