1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33097 1.4 Accessories When you need to purchase a power cord In some countries the power cord is not provided with this unit, if this is the case then please purchase an approved one that meets the following standards or contact your authorised TOSHIBA TEC CORPORATION representative. (As of Oct. 2014) *1: At least, 125% of the rated current of the product. E1- 2 Certification Country Agency mark Country Agency Certification mark Certification Country Agency mark Australia SAA Germany VDE Sweden SEMKKO Austria OVE Ireland NSAI Switzerland SEV Belgium CEBEC Italy IMQ UK ASTA Canada CSA Japan METI UK BSI Denmark DEMKO Netherlands KEMA U.S.A.
UL Finland FEI Norway NEMKO Europe HAR France UTE Spain AEE China CCC Power Cord Instruction 1. For use with 100 – 125 Vac mains power supply, please select a power cord rated Min. 125V, 10A. 2. For use with 200 – 240 Vac mains power supply, please select a power cord rated Min. 250V. 3. Please select a power cord with the length of 2m or less. 4. The power cord plug connected to the AC adapter must be able to be inserted into an ICE-320-C14 inlet. Refer to the following figure for the shape. Country/Region North America Europe United Kingdom Australia China Power Cord Rated (Min.) Type Conductor size (Min.) 125V, 10A SVT No.
3/18AWG 250V H05VV-F 3 x 0.75 mm2 250V H05VV-F 3 x 0.75 mm2 250V AS3191 approved, Light or Ordinary Duty type 3 x 0.75 mm2 250V GB5023 3 x 0.75 mm2 Plug Configuration (locally approved type) Rated (Min.) 125V, 10A 250V, 10A 250V, *1 250V, *1 250V, *1