1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33097 1.5 Appearance 1.5.5 Button and Indicator Lamp The [FEED] button has three functions. It can operate as a FEED, RESTART or PAUSE button depending on current the printer state. The indicator lamps (LED1 and LED 2) light up or flash in different colors and sequences depending on the printer status. A quick guide to lamp statuses and their meaning is shown inside the top cover. F : Flashes fast (0.5 sec) M : Flashes at medium speed (1.0 sec) S : Flashes slowly (2.0 sec) E1- 5 As a FEED button Pressing this button when the printer is online will cause the media to feed forwards.
As a RESTART button Pressing this button after removing the cause of an error returns the printer to an online state. Pressing this button with the printer is paused will resume printing. As a PAUSE button Pressing this button while the printer is printing will stop the printing after completing the current label. The printer is then paused. LED 1 LED 2 Printer Status Unlit Unlit The power is off. The print head block is open if the printer power is on. Green Unlit Stand-by Green S Unlit Printing is temporarily stopped (paused).
Green F Unlit Communicating with a host Green Green Writing data to the flash or USB memory Green Green M The Flash ROM on the CPU board or USB memory is being initialized. Orange Green A paper jam occurred. Orange Red The media has ended. Orange Red F The media has ended while the print data is being sent to the printer. Red Red M Thermal Head open error. The thermal head has been opened during an operation. Red Orange F The print head temperature exceeded the upper limit. Red Green A communication error occurred.
(Only when the RS-232C is used.) Red Green S Command error Red Green M Flash ROM on the CPU board error, or USB memory error An erase error while formatting the Flash ROM on the CPU board or USB memory Unable to save files due to insufficient storage space on the Flash ROM on the CPU board or USB memory. Red Green F A paper jam occurred in the cutter unit. (Only when the cutter unit is fitted.) Red Orange M The print head is broken.