2. PRINTER SETUP ENGLISH VERSION EO1-33097 2.5 Connecting the Power Adapter and the Power Cord 2.5 Connecting the Power Adapter and the Power Cord 1. Make sure that the printer power switch is in the OFF (O) position. 2 . Insert the Power Cord into the inlet of the Power Adapter. NOTES: 1. If a power cord is not provided with this printer, please purchase the correct one referring to page 1-2. 2. The EA1050B-240 AC adapter should be exclusively used for the B-FV4D-xxxx-QM-R Series printer. The B-FV4D- xxxx-QM-R Series printer must be powered by the EA1050B-240 AC adapter. 3. The EA10681P-240 AC adapter should be exclusively used for the B-FV4D-xxxx- QQ-R Series printer.
The B- FV4D-xxxx-QQ-R Series printer must be powered by the EA10681P-240 AC adapter. Power Cord 3. Insert the Power Adapter connector into the Power Jack on the rear of the printer. Power Adapter Power Jack Power Adapter Connector WARNING! The areas indicated by the ellipse have sharp edges. To avoid injury, be careful not to touch them when handling the printer. E2-5