2. PRINTER SETUP ENGLISH VERSION EO1-33097 2.7 Loading the Media 2.7 Loading the Media (Cont.) 1. Open the Top Cover while pulling the Lock Release Portions as indicated by the arrows. Top Cover 2. Open the Media Roll Holders by pressing the Holder Lock Lever and slide them outward. Place the media roll between the holders ensuring that print side is facing up, then using Holder Lock Lever slide the Media Roll Holders to clamp the media roll tightly. Lock Release Portion NOTE: Media path For the outside- wound media For the inside- wound media Feed Gap Sensor Platen Black mark sensor Feed Gap Sensor Platen Holder Lock Lever Black mark sensor NOTES: 1. Make sure that the print side faces up.
2. Cut the leading edge of the media straight with scissors. E2-8