2. SPECIFICATIONS EO1-33076 2.3 PAPER (LABEL/TAG) SPECIFICATIONS 2.3 PAPER (LABEL/TAG) SPECIFICATIONS [Unit: mm] 2.4 RIBBON SPECIFICATIONS NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper and ribbons. 2. For further information about paper and ribbon, refer to Section 7. CARE/HANDLING OF THE PAPER AND RIBBON. 2.5 OPTION NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC representative or TOSHIBA TEC Head Quarter. 2-2 Label dispensing mode Item Batch mode Strip mode Cut mode Span of one label/tag 15.0 ~ 999.0 25.4 ~ 999.0 Label: 37.0 ~ 999.0 Tag:
25.4 ~ 999.0 Label length 13.0 ~ 997.0 23.4 ~ 997.0 31.0 ~ 993.0 Width including backing paper 25.4 ~ 114.0 Label width 22.4 ~ 111.0 Gap length 2.0 ~ 20.0 2.0 ~ 20.0 6.0 ~ 20.0 Black mark length (Tag paper) 2.0 ~ 20.0 Effective print width 10.0 ~ 105.7 Effective print length Label 15.0 ~ 500.0 Tag 15.0 ~ 500.0 Print speed up/slow down area 1.0 Black mark length (Label) MIN. 2.0 Outer roll diameter MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2) Thickness 0.1 ~ 0.17 0.13 ~ 0.17 0.1 ~ 0.17 Type Spool type Width 60 mm ~ 110 mm Length (300 m) Outer diameter Ø65 mm (max.) Option Name Type Use Cutter module B-7204-QM-R This cutter module uses a rotary cutter.
It cuts backing paper of labels and tag paper automatically in "stop and cut" mode. Strip module B-7904-H-QM-R This strip module strips the label from the backing paper with the take-up block and strip block. When the rewinder guide plate is attached, the tag paper and label with backing paper are wound. Expansion I/O interface board B-SA704-IO-QM-R Installing this board in the printer allows a connection with an external device with the exclusive interface. Serial Interface B-7704-RS-QM-R Installing this PC board provides an RS232C inter- face port. Wireless LAN Interface B-SA704-WLAN-QM-R Installing this PC board allows a communication by wireless LAN.