6. LOADING THE PAPER EO1-33076 6. LOADING THE PAPER 3. Put the paper roll and supply holders on the supply holder unit. NOTE: Paper may be wound outside or inside. Regardless of the paper roll, the paper must be loaded so that the print side faces upward. Paper wound inside. Paper wound outside. Fig. 6-4 4. Push both sides of the supply holder guides against the paper roll, then lock them with the lock lever. NOTE: Make sure that the supply holders rotate slightly. 5. Pass the paper through the printer until it is past the paper outlet. 6. Adjust the position of the paper guides to the paper width, then lock them with the lock lever.
Paper Guide Paper Roll Supply Holder Paper Guide Lock Lever Supply Holder Guide Fig. 6-5 7. Close the print head block by pressing both sides of the print head block’s top until it clicks. Lock Lever Head Block Fig. 6-6 6-2