Button Description Report - tap to save the DTCs in report format. (To view the saved reports, go to Folder > Reports > Fault Code Report ) Clear DTCs - tap to clear all the DTCs retrieved. Clear DTCs 1. After the vehicle is identified, select the system for which you wish to clear DTCs from the systems menu. 2. Tap Clear DTCs in the function menu. 3. Tap OK when the DTCs are cleared. Note: 1. The procedure of clearing DTCs should be performed after the required repair has been carried out. Once confirmed, DTCs and freeze data stored in the ECU will be cleared. 2. DO NOT START UP THE ENGINE WHILE CLEARING DTCS. Read Data Stream 1.
After the vehicle is identified, select the system for which you wish to read the data stream from the system menu. 2. Tap Data stream in the function menu. A data stream list displays. Figure 4-6 23