User Manual of EM730 Series Inverter F00.29 is used to set a password to enable the password protection and prevent the function code parameters of the inverter from modification by unauthorized personnel. If the password is set to 0, the password function will be invalid. When a non-zero user password is set, all parameters (except this function code) can only be viewed and are not modifiable. The maximum frequency in this mode is 600.00Hz. F00.31=0: The frequency resolution is 0.01Hz, corresponding to the frequency of 50.00Hz. F00.31=1: The frequency resolution is 0.1Hz, corresponding to the frequency of 50.00Hz. The maximum frequency in this mode is 3000.0Hz.
It is suitable for high-frequency spindle motors. F00.55=0: 380V The voltage of the applied power supply is 380V. F00.55=1: 440V the corresponding dynamic braking voltage and stall overvoltage will increase accordingly. The voltage of the applied power supply is 440V. When the function code is set to 440V, 7.2 Motor 1 parameter group of F01 group 166 0: parameter group of motor 1 Invalid Motor 1 F00/F01/F06 Valid Motor 2 F14 1:
parameter group of motor 2 Invalid Motor 2 Valid Motor 1 F00/F01/F06 Function code Function code name Parameter description Unit Default setting Attribute mailing address F00.29 User password 0 - 65535 0 〇 0x001D Function code Function code name Parameter description Unit Default setting Attribute mailing address F00.31 Frequency resolution 0：0.01Hz 1：0.1Hz (speed unit: 10rpm) 0 〇 0x001F Function code Function code name Parameter description Unit Default setting Attribute mailing address F00.35 Power supply voltage selection 0: 380V 1: 440V 0 〇 0x0023 Function Function code Parameter description Unit Default Attribute mailing