User Manual of EM730 Series Inverter ★ Fmax, maximum frequency (F00.16) Ie, rated current of the inverter (F12.21) Ue, rated voltage of the inverter (F12.20) The output physical quantity of the analog output terminal can be switched between the Pe, rated power of the inverter (F12.19) voltage signal (0.00V to 10.00V) and current signal (0.00mA to 20.00mA) via the jumper cap For the voltage signal output, the value from 0.0% to 100.0% corresponds to the output 0.00V to 10.00V. For the current signal output, the value from 0.0% to 100.0% corresponds to the output 0.00mA to 20.00mA.
The above function codes are usually used to correct the zero drift of analog output and the deviation of output amplitude. They can also be used to customize the required AO output curve to meet the requirements of different instruments or others. If the offset is represented by “b”, the gain by “k”, actual output by “Y” ， standard output by “X”, the actual output is: Y=kX ＋ b. 196 9 AI2 result. 0.0% to 100.0%, corresponding to the output 0.0% to 100.0% 12 High-frequency pulse input (with 100% corresponding to 100.00kHz) The function codes F02.26-F02.28 correspond to the output 0.0%-100.0%.
13 Communication setting 1 Communication setting by M1 terminal, communication address option 701AH 14 Count value 0 to F16.03, corresponding to the output F16.10 to F16.11 15 Length value 0 to F16.01, corresponding to the output F16.10 to F16.11 16 PID output percentage -100.0% to 100.0%, corresponding to the output 0.0% to 100.0% 18 PID feedback -100.0% to 100.0%, corresponding to the output 0.0% to 100.0% 19 PID setting -100.0% to 100.0%, corresponding to the output 0.0% to 100.0% Function code Function code name Parameter description Unit Default setting Attribute Mailing address F03.27 M1 output bias -100.0 ~ 100.0 % 0.0 ● 0x031B F03.28 M1 output gain -10.00 ~ 10.00 1.00 ● 0x031C