User Manual of EM730 Series Inverter 7.13 Keyboard and Display Function Parameter Group of F12 Group function code F12.00. If F12.00=0, this key has no effect when pressed. For other settings, the is a multi-function key, of which the function can be performed by setting the corresponding effects will be obtained when this key is pressed. According to the setting of the function code F00.02 (command source option), the command sources are divided into the keyboard, terminal and communication. If the terminal is selected as the current command source, the Run and Stop key on the keyboard will be unavailable.
In more dangerous cases, however, the fastest way is to stop the inverter via the Stop keyboard to stop the inverter during normal operation. Therefore, the function code “F12.01: key on the keyboard to resolve dangers. It is the most convenient to use the stop function options of the STOP key” is added. In addition, the STOP key is always valid by default. ★ It is recommended not to modify this parameter. If necessary, please set it carefully. In order to avoid unnecessary danger caused by keyboard operation or misoperation of 258 Function code Function code name Parameter description Unit Default setting Attribute Mailing address F12.00 M.K multi-function key options 0: no function 1:
forward jog 2: reverse jog 3: forward/reverse switching 4: quick stop 5: free stop 6: cursor movement to the left 1 〇 0x0C00 Function code Function code name Parameter description Unit Default setting Attribute Mailing address F12.01 Options of stop function of STOP key 0: valid only in keyboard control 1: with all command channels valid 1 〇 0x0C01 Function code Function code name Parameter description Unit Default setting Attribute Mailing address F12.02 Parameter locking 0: do not lock 1: reference input not locked 2: all locked, except for this function code 0 ● 0x0C02