User Manual of EM730 Series Inverter non-workers, the keyboard has a parameter locking function. The current function code is unlocked by default, and all function codes can be set. After the function code is debugged according to the working conditions, the parameters can be locked. 1: reference input not locked In the lock mode, all function codes cannot be modified, expect this function code and those with reference input properties. Specific function codes with parameter input properties are shown in Table 7-19: Table 7- 19 List of Function Codes with Reference Input Properties 2:
all locked, except for this function code mostly used when it is not necessary to set parameters after debugging. We can only perform In the lock mode, all function codes cannot be set except this function code. This mode is running, stop and parameter monitoring in this mode. We can press the ESC key to enable the monitoring mode (see 4.4 When the inverter is in the protection status, you can directly press the right shift key to switch the current protection type and the output frequency, output current, output voltage, running status and working time during the protection. Operation Monitoring: press the right shift key to display the parameters in cycles.
The function codes F12.04 to F12.08 are used to select the parameters to be displayed in the cycle display queue. The selected items basically correspond to the monitoring parameter group of the F18 group, so you can directly view the current values of all parameters in the F18 group.
259 Function code Function code name Function code Function code name F00.07 Digital frequency setting F08.11 Multi-segment speed 12 F08.00 Multi-segment speed 1 F08.12 Multi-segment speed 13 F08.01 Multi-segment speed 2 F08.13 Multi-segment speed 14 F08.02 Multi-segment speed 3 F08.14 Multi-segment speed 15 F08.03 Multi-segment speed 4 F13.02 Digital torque setting F08.04 Multi-segment speed 5 F09.01 Digital PID setting F08.05 Multi-segment speed 6 F09.32 Multi-segment PID setting 1 F08.06 Multi-segment speed 7 F09.33 Multi-segment PID setting 2 F08.07 Multi-segment speed 8 F09.34 Multi-segment PID setting 3 F08.08 Multi-segment speed 9 F13.03 Multi-segment torque 1 F08.09 Multi-segment speed 10 F13.04 Multi-segment torque 2 F08.10 Multi-segment speed 11 F13.05 Multi-segment torque 3