User Manual of EM760 High-Performance Inverter 6.9.1.4 Polisher application F16.00=6: polisher application The inverter can be used to configure the parameters ofthe corresponding function code for the polisher application macro. 175 F00.02 Options of command source 1: terminal control (LOC/REM indicator: OFF) 1 O F00.03 Options of terminal control mode 1: terminal RUN (forward) and F/R (reverse) 1 O F00.04 Options of main frequency source A 1:
AI1 1 O F00.14 Acceleration time 1 0.00~650.00(F15.13=0) s 2.00 ● F00.15 Deceleration time 1 0.00~650.00(F15.13=0) s 2.00 ● F00.16 Maximum frequency 1.00Hz~600.00 Hz 100.00 O F00.18 Upper frequency limit Lower frequency limit F00.19 to maximum frequency F00.16 Hz 100.00 ● F07.06 Bus voltage control options Ones place: Instantaneous stop/no-stop function options 0: Invalid Tens place: Overvoltage stall function options 0: Invalid 0 O F07.27 AVR function 2: automatic 2 O F15.30 Options of energy consumption braking function 0: Invalid 1:
valid 1 O F15.31 Energy consumption braking voltage 110.0~140.0(380V,100.0=537V) % 132.0 O Function code Function codename Parameter description Unit Current value of application macro Attribute F00.02 Options of command source 1: terminal control (LOC/REM indicator: OFF) 1 O F00.04 Options of main frequency source A 7: main frequency communication setting (direct frequency) 7 O F00.14 Acceleration time 1 0.00~650.00(F15.13=0) s 5.00 ● F00.15 Deceleration time 1 0.00~650.00(F15.13=0) s 5.00 ● F00.16 Maximum frequency 1.00Hz~600.00 Hz 50.00 O F00.18 Upper frequency limit Lower frequency limit F00.19 to maximum frequency F00.16 Hz 50.00 ● F10.01 Baud rate of Modbus communication 2:
19200 2 O F10.02 Modbus data format 1: 1-8-E-1 (1 start bit + 8 data bits + 1 even parity check bit + 1 stop bit) 1 O