4-2 Function Mode „ Register Number List R/W in the list shows whether the coil or holding register accepts reading and/or writing. R: Read only R/W: Read and write enabled Coil Number List 4 Functions *1. When either the control circuit terminal block or the coil is turned ON, these settings are ON. The control circuit terminal block has the priority for the multi-function input terminals. If the master cannot reset the coil ON status because of communication disconnection, turn the control circuit terminal block from ON to OFF in order to turn off the coil. *2. The content of a communications error is retained until a fault reset is input. (Can be reset during operation.) 4-76 Coil No.
Function name R/W Description 0000h No used 0001h RUN command R/W 1: RUN 0: Stop (Enabled when A002 = 03) 0002h Rotation direction command R/W 1: Reverse 0: Forward (Enabled when A002 = 03) 0003h External trip (EXT) R/W 1: Trip 0004h Trip reset (RS) R/W 1: Reset 0005h No used 0006h No used 0007h Multi-function input 1 R/W 1: ON 0: OFF *1 0008h Multi-function input 2 R/W 1: ON 0: OFF *1 0009h Multi-function input 3 R/W 1: ON 0: OFF *1 000Ah Multi-function input 4 R/W 1: ON 0: OFF *1 000Bh Multi-function input 5 R/W 1: ON 0: OFF *1 000Ch Multi-function input 6 R/W 1: ON 0: OFF *1 000Dh Not used 000Eh Operation status R 1: RUN 0:
Stop (Interlocked with d003) 000Fh Rotation direction R 1: Reverse 0: Forward (Interlocked with d003) 0010h Inverter ready R 1: Ready 0: Not ready 0011h to 0013h Not used 0014h Alarm signal R 1: During trip 0: Normal 0015h Excessive PID deviation signal R 1: ON 0: OFF 0016h Overload warning signal R 1: ON 0: OFF