4-2 Function Mode 4 Functions Multi-function Output Terminal Contact Selection •You can set NO- or NC-contact output individually for multi-function output terminals P1 to P5 as well as the relay output terminal. •Multi-function output terminals P1 to P5 provide open-collector output. 4-92 Data Description Reference item Page 33 LOG1: Logic operation output 1 Logic operation function 4-98 34 LOG2: Logic operation output 2 35 LOG3: Logic operation output 3 36 LOG4: Logic operation output 4 37 LOG5: Logic operation output 5 38 LOG6: Logic operation output 6 39 WAC: Capacitor life warning signal Capacitor life warning signal 4-99 40 WAF:
Cooling fan life warning signal Cooling fan speed drop signal 4-100 41 FR: Starting contact signal Starting contact signal 4-100 42 OHF: Fin overheat warning Fin overheat warning 4-100 43 LOC: Light load detection signal Light load detection signal 4-101 44 Not used 45 Not used 46 Not used 47 Not used 48 Not used 49 Not used 50 IRDY: Operation ready signal Operation ready signal 4-101 51 FWR: Forward run signal Forward run signal 4-102 52 RVR: Reverse run signal Reverse run signal 4-102 53 MJA: Fatal fault signal Fatal fault signal 4-102 54 WCFV: Window comparator FV Window comparator function 4-63 55 WCFI: Window comparator FI 56 WCFE:
Window comparator FE Related functions C021 to C025, C026 Parameter No. Function name Data Default setting Unit C031 to C035 Multi-function output terminal contact selection 00: NO contact 01: NC contact 00 C036 Relay output (MA, MB) contact selection 00: NO contact between MA and MC 01: NC contact between MA and MC 01