4-4 Communication Function 4 Functions *1. When either the control circuit terminal block or the coil is turned on, these settings are ON. The control circuit terminal block has the priority for the multi-function input terminals. If the master cannot reset the coil ON status because of communication disconnection, turn the control circuit terminal block from ON to OFF to turn off the coil. *2. The communications error is retained until a fault reset is input. (Can be reset during operation.) 4-167 Coil No. Item R/W Description 002Ah POK (position ready) R 1: ON 0: OFF 002Bh FA4 (set frequency exceeded 2) R 1: ON 0: OFF 002Ch FA5 (set frequency only 2) R 1: ON 0:
OFF 002Dh OL2 (overload warning signal 2) R 1: ON 0: OFF 002Eh FVDc (analog FV disconnection detection) R 1: ON 0: OFF 002Fh FIDc (analog FI disconnection detection) R 1: ON 0: OFF 0030h FEDc (analog FE disconnection detection) R 1: ON 0: OFF 0031h Not used 0032h FBV (PID FB status output) R 1: ON 0: OFF 0033h NDc (network error) R 1: ON 0: OFF 0034h LOG1 (logic operation output 1) R 1: ON 0: OFF 0035h LOG2 (logic operation output 2) R 1: ON 0: OFF 0036h LOG3 (logic operation output 3) R 1: ON 0: OFF 0037h LOG4 (logic operation output 4) R 1: ON 0: OFF 0038h LOG5 (logic operation output 5) R 1: ON 0: OFF 0039h LOG6 (logic operation output 6) R 1: ON 0:
OFF 003Ah WAC (capacitor life warning) R 1: ON 0: OFF 003Bh WAF (cooling fan life warning) R 1: ON 0: OFF 003Ch FR (starting contact signal) R 1: ON 0: OFF 003Dh OHF (fin overheat warning) R 1: ON 0: OFF 003Eh LOC (low current signal) R 1: ON 0: OFF