Appendix-1 Parameter List Basic Function Mode (F ) Appendix * 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001 to C008. App-3 Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Set value d103 Regenerative braking load rate monitor 0.0 to 100.0 % d104 Electronic thermal monitor 0.0 to 100.0 % Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Set value F001 Output frequency setting/monitor 0.0/Starting frequency to 1st/2nd/3rd max.
frequency 0.0 to 100.0 (PID control enabled) Yes Hz F002 Acceleration time 1 0.01 to 99.99 100.0 to 999.9 1000. to 3600. 30.00 Yes s F202 * 2nd acceleration time 1 0.01 to 99.99 100.0 to 999.9 1000. to 3600. 30.00 Yes s F302 * 3rd acceleration time 1 0.01 to 99.99 100.0 to 999.9 1000. to 3600. 30.00 Yes s F003 Deceleration time 1 0.01 to 99.99 100.0 to 999.9 1000. to 3600. 30.00 Yes s F203 * 2nd deceleration time 1 0.01 to 99.99 100.0 to 999.9 1000. to 3600. 30.00 Yes s F303 * 3rd deceleration time 1 0.01 to 99.99 100.0 to 999.9 1000. to 3600. 30.00 Yes s F004 Operator rotation direction selection 00: (Forward) 01: (Reverse) 00 No