3-7 Parameter List 3 Operation * 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001 to C008. 3-48 Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Page Input terminal response C160 Input terminal response time 1 0. to 200. (× 2 ms) 1 No ms 4-103 C161 Input terminal response time 2 0. to 200. (× 2 ms) 1 C162 Input terminal response time 3 0. to 200. (× 2 ms) 1 C163 Input terminal response time 4 0. to 200. (× 2 ms) 1 C164 Input terminal response time 5 0. to 200. (× 2 ms) 1 C165 Input terminal response time 6 0. to 200. (× 2 ms) 1 C166 Input terminal response time 7 0. to 200.
(× 2 ms) 1 C167 Input terminal response time 8 0. to 200. (× 2 ms) 1 C168 Input terminal response time FW 0. to 200. (× 2 ms) 1 Others C169 Multi-step speed/ position determination time 0. to 200. (× 10 ms) 0 No ms 4-16 4-128 Control parameter H001 Auto-tuning selection 00: Disabled 01: Not rotate 02: Rotate 00 No 4-107 H002 Motor parameter selection 00: Standard motor parameter 01: Auto-tuning parameter 02:
Auto-tuning parameter (online auto-tuning enabled) 00 No 4-107 4-109 4-110 H202 * 2nd motor parameter selection 00 H003 Motor capacity selection 0.20 to 75.00 Factory default No kW 4-19 4-107 4-110 4-114 H203 * 2nd motor capacity selection Factory default H004 Motor pole number selection 2/4/6/8/10 4 No Pole H204 * 2nd motor pole number selection 4 H005 Speed response 0.001 to 9.999/10.00 to 80.00 (10.000 to 80.000) 1.590 Yes 4-86 4-88 H205 * 2nd speed response 1.590