3-7 Parameter List 3 Operation * 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001 to C008. 3-49 Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Page Control parameter H006 Stabilization parameter 0. to 255. 100. Yes 4-115 H206 * 2nd stabilization parameter 100. H306 * 3rd stabilization parameter 100. H020 Motor parameter R1 0.001 to 9.999 10.00 to 65.53 Depends on the motor capacity. No Ω 4-110 H220 * 2nd motor parameter R1 Depends on the motor capacity. H021 Motor parameter R2 0.001 to 9.999 10.00 to 65.53 Depends on the motor capacity.
No Ω H221 * 2nd motor parameter R2 Depends on the motor capacity. H022 Motor parameter L 0.01 to 99.99 100.0 to 655.3 Depends on the motor capacity. No mH H222 * 2nd motor parameter L Depends on the motor capacity. H023 Motor parameter Io 0.01 to 99.99 100.0 to 655.3 Depends on the motor capacity. No A 4-110 H223 * 2nd motor parameter Io Depends on the motor capacity. H024 Motor parameter J 0.001 to 9.999 10.00 to 99.99 100.0 to 999.9 1000. to 9999. Depends on the motor capacity. No kgm2 H224 * 2nd motor parameter J Depends on the motor capacity.