6.4 - USB 3.0 Camera Pin Outs and IO Table The pin assignements for the USB 3.0 cameras are shown in the table below. Line0 – Opto Isolated Trigger Input. Pin4 Line1 – Opto Isolated Strobe Output. Pin3 Common – Opto Isolated Common used for Trigger and Strobe. Pin 1 Caution: Power to camera is supplied through USB 3.0 cable. The IO Cable does not support power to the camera. Using same wiring as GigE versions can cause damage to the camera. 6.5 - USB 3.0 Standard Camera IO Table 6.6 - Using Omron Sentech STC-M Cameras with OCR Smart Lights - Strobing Using Sentech STC-M Cameras with AutoVISION and Visionscape Page 26 of 35