6.2 – Power, Trigger, Strobe and IO Cable The HRS6-AV-6-2M can be used as the standard Power and IO Cable. The pin out and wire colors for this cable are shown below. 6.3 – GigE Camera Pin Outs and IO Table The pin assignements for the GigE cameras are shown in the table below. Line0 – Opto Isolated Trigger Input. Pin2 Line1 – Opto Isolated Strobe Output. Pin4 Common – Opto Isolated Common used for Trigger and Strobe. Pin 5 Power IN/GND – Pin 1 and Pin 6 Note: Power can be supplied though PoE Ethernet cable as well Using Sentech STC-M Cameras with AutoVISION and Visionscape Page 25 of 35