7. Accessory Compartment This is where the inflation nozzle and needle are kept. 8. Inflation Hose 3.2 Jump Start Clamp Cable 4 5 1 3 2 1. Tool-Ready Indicator It lights up solid green when the jump starter is ready to use. 2. Error Indicator It lights up solid red when a reverse polarity, short circuit, over temperature, or improper connection is detected. (The internal buzzer will beep in the meantime.) Note: If the jump starter is properly connected, but neither the Tool-Ready indicator nor the Error indicator is illuminated, it may be because the vehicle’s battery voltage is less than 3V. Try jump- starting your vehicle with the BOOST mode. 11