3. BOOST Button Press it to enable the BOOST mode. The Tool-Ready indicator will light up green. Start your vehicle within 30 seconds. The BOOST mode automatically turns off, and the green Tool-Ready indicator goes out if the vehicle is not started within 30 seconds or successfully cranked. Note: Under the BOOST mode, all safety protections will be temporarily disabled. Use this mode with caution and only when the traditional battery jump option has been tried already. 4. Positive Clamp (Red) 5. Negative Clamp (Black) 4 Instructions for Use 4.1 Charging V2200Air Note: V2200Air must be fully charged before use. You can charge V2200Air via the USB-C port.
Connect one end of the USB-C to USB-C cable to the USB-C port. Connect the other end to a power outlet with a USB-C port or to an power adapter (not included). 4.2 Powering on V2200Air Press to power on V2200Air. 12