1 Setup of Camera & Software Vision 1-2 Setup of Camera & Software Vision (FJ-S ЈЈЈЈ Series) 1 1-2-4 Configure Gigabit Ethernet adapter 2 Select Advanced tab, and set the following parameters. Your network adapter may show the parameters in different name, or some of the parameters are not supported. Additional Information If you cannot find some of the parameters shown above, it is not necessary to set it. 1-9 FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1) Item Value Description Jumbo Frame Maximum value sup- ported by network adapter Size of data for one cycle of communication. Set- ting bigger value makes the data transmission more efficient.
Receive Descriptor Maximum value sup- ported by network adapter The parameter related to the capacity of a receive buffer. Setting bigger value makes the data re- ceive more efficient. Interrupt Moderation rate Minimum value The quantity of interrupt to CPU for each received packet. Lower value so the driver is more respon- sive to incoming and outgoing packets. Speed and Duplex Mode Automatic Speed and communication mode