Switching Scenes on the Vision Sensor The following describes a program that switches the scene to a Camera Calibration AOS scene. 54 There is no need to configure the communication settings for each node since the sample program uses the FH series as a common communication device. 1 In the Edit project window, select the FHSAMPLE CALIBAOS subflow. _ 2 Select the ChangeScene node on the flow, and click the pencil icon to open the setting window. fhrunsendcmd Component ▼ 3 Set the scene number of the Camera Calibration AOS as an argument to the fhrunsendcmd component. Execute the fhrunsendcmd component with the set value to send a scene switching command to the vision system.
* Click InputArgument > Variables[7] to open the setting window. Number of command arguments Scene switching command