Care & Maintenance Pausing When the robot vacuum is running, press any buton to pause. Press the buton to resume cleaning. Note: The robot vacuum will enter sleep mode afer being paused or in standby mode for five minutes. Press any buton to wake it up. 2-in-1 Dust Compartment with Water Tank and Filter 1. Remove the 2-in-1 dust compartment with water tank and remove the filter. When the robot vacuum is working, pause it first then remove the 2-in-1 dust compartment with water tank to add water or clean the mop pad. Then reinstall the 2-in-1 dust compartment with water tank and press the buton to resume the task. Adding Water or Cleaning the Mop Pad 2.
Remove any debris and clean the 2-in-1 dust compartment with water tank with the cleaning brush. Docking & Charging When the robot vacuum is working, press the buton to pause the task, and press the buton again to send the robot vacuum to return to the dock to charge. When the robot vacuum is in standby mode and not connected to the charging dock, press the buton to send the robot vacuum to return to the dock to charge. When a task is complete or the batery is too low, the robot vacuum will automatically return to the dock to charge. DND mode CAUTIONS: Do not rinse or soak the 2-in-1 dust compartment with water tank.
Regularly clean the 2-in-1 dust compartment with water tank to prevent dirt buildup. This will help maintain optimal performance. In the do not disturb (DND) mode, the robot vacuum does not resume cleanup, perform scheduled cleanups or play voice prompts, and the indicator turns off afer one minute of charging. The DND mode can be enabled or disabled in the app. Note: Please refer to the app for more features, including Clean There, Resume Cleanup, Scheduled Cleanup, and Virtual Walls. 3. Clean the filter with the cleaning brush. Notes: When using the robot vacuum for the first time, please follow the in-app prompts to complete quick map creation.
To ensure accurate mapping, it is recommended to follow the robot vacuum and remove any obstacles on the ground when it is creating the map. Make sure the robot vacuum starts from the charging dock. If the robot vacuum may get stuck or scratch the surface of the furniture in some areas, you can set restricted areas in the app to prevent the robot vacuum from entering those areas. Note: The filter can be rinsed with water. Make sure it is completely dry before reinstalling. Frequent rinses are not recommended. 10