How to Use Connect with the Mi Home/Xiaomi Home App Start Cleaning This product works with the Mi Home/Xiaomi Home app*. Use the Mi Home/ Xiaomi Home app to control your device, and to interact with other smart home devices. Press the button on the robot vacuum or tap the button in the app, and the robot vacuum will clean all areas by first cleaning along edges and walls and then in an S-shape pattern. Once the cleaning is complete, the robot vacuum will automatically return to the charging dock to charge. Method 1: Press the button on the robot vacuum to start cleaning. Scan the QR code to download and install the app.
You will be directed to the connection setup page if the app is installed already. Or search for "Mi Home/Xiaomi Home" in the app store to download and install it. Open the Mi Home/Xiaomi Home app, tap on the upper right, and then follow the instructions to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. 5812D4E4 Notes: · This robot vacuum works with the Mi Home/Xiaomi Home app, and it supports Android 4.4 & iOS 10.0 or above. · Only 2.4 GHz Wi-Fi networks are supported.
· The version of the app might have been updated, please follow the instructions based on the current app version. Method 2: Tap the button in the app to start cleaning. Reset Wi-Fi When there is a connection loss between your phone and the robot vacuum due to the router reconfiguration, wrong password or so, please follow the steps below: 1. Open the cover of the robot vacuum so that you can see the Wi-Fi indicator. 2. Simultaneously press and hold the buttons and until you hear a voice to Notes: · Before a cleaning task, make sure the robot vacuum is on the charging dock and fully charged. Do not move the robot vacuum during cleaning.
· When using the robot vacuum for the first time, it is recommended to follow the robot vacuum and remove any obstacles on the ground. If the robot vacuum may get stuck or scratch the surface of the furniture in some areas, you can set restricted areas in the app to prevent the robot vacuum from entering those areas. indicate that the robot vacuum is waiting for the network configuration. 3. When the Wi-Fi indicator blinks, the Wi-Fi connection has been reset successfully. 8