Care & Maintenance Display and Butons Instructions Precautions: When using the electric tangle-free brush bar, electric mite brush, crevice nozzle, or brush nozzle, the vacuum cleaner uses the Auto Mode as the default, and the Auto Mode will show on the display. • Always use genuine parts to ensure normal operation and to keep your warranty valid. • If any rotating part becomes stuck, the vacuum cleaner may shut off automatically. Remove any trapped foreign objects, then resume use. • Before cleaning, remove the brush head from the vacuum cleaner to prevent accidentally turning on the vacuum cleaner, which can cause injury.
• If the vacuum cleaner will not be used for an extended period, fully charge it and disconnect it from the power then store it in a cool, low-humidity environment away from direct sunlight. • To avoid over-discharging the batery, recharge the vacuum cleaner at least once every three months. Status Indicator Batery Level Indicator • Green: Batery level > 20% • Red: Batery level ≤ 20% Lock Buton • Press to switch between Non-continuous Mode and Continuous Mode. Suction Level/Language Buton • Press to cycle through the vacuum cleaner's suction levels of Eco, Auto, and Turbo. • Press and hold for 3 seconds to enter the language setup, and then press to switch the language.
To use the selected language, press and hold the buton for 3 seconds or no operation for 5 seconds. Cleaning the Vacuum Cleaner Wipe the vacuum cleaner with a sof, dry cloth. Working Modes Non-continuous Mode Hold down the power buton to start the vacuum cleaner, then release to stop it. Continuous Mode Press the buton to switch to Continuous Mode. Press continuously; press the power buton again, it will stop the power buton of the vacuum cleaner, it will work working. 9 Auto