How To Use 1. Before use 3. Place the charging dock on the level ground against a wall. Remove the protective foam strips from both sides, and peel the protective film off the collision sensor. 0.5m 1.5m 0.5m 4. Turn on and charge the vacuum-mop. Press and hold the buton " " for 3 seconds to turn on the vacuum-mop. When the indicator lights up, manually place the vacuum-mop onto the charging dock to charge. 2. Connect to the power supply Open the botom cover of the charging dock. Connect the power cord, and wrap any excess cord around the spool on the botom of the dock, then remove the protective film from the IR sensor. 09