Turning On/Off Press and hold the buton " " for 3 seconds to turn on the vacuum-mop. The indicator will turn white and you will hear a voice message indicating that the vacuum-mop is in standby mode. To turn off the vacuum-mop, press and hold the buton " " while it is stationary. A voice message will indicate that the vacuum-mop is turning off. Note: The vacuum-mop cannot be turned off while charging. If the vacuum-mop is unable to turn on due to low batery, manually place the vacuum-mop onto the charging dock to recharge. Starting/Pausing Cleanup Turn on the vacuum-mop, then press the buton " " to start cleanup. To pause cleanup while the vacuum-mop is working, press the buton " ". Note:
The vacuum-mop cannot be used to clean up liquids. If the vacuum-mop is low on batery and cannot start cleaning, recharge it to a sufficient level before cleaning. If the vacuum-mop starts to run low on batery during a cleaning task, it will automatically return to the charging dock. Once its batery level is sufficient, the vacuum-mop will automatically resume cleaning where it lef off. Before cleaning, tidy up any loose cables on the floor (including the charging dock power cord) to prevent the vacuum from dragging or geting caught on them, which could accidentally shut off electrical appliances or cause damage to objects or cables. Starting/Pausing Docking Auto mode:
The vacuum-mop will automatically return to the charging dock afer it finishes cleaning. Manual mode: Press the buton " " to manually send the vacuum-mop to the charging dock. When returning to the charging dock, the vacuum-mop's indicator blinks white, or blinks orange if the vacuum-mop runs low batery. The indicator slowly blinks white while charging, and stays white when fully charged. Note: If the vacuum-mop is unable to return to the charging dock due to an error, make sure there are no obstacles around the charging dock, then manually place the vacuum-mop onto the dock to recharge. 12