Sleep Mode Resuming Cleanup The vacuum-mop will automatically enter sleep mode afer 5 minutes of inactivity. To wake it up, press any buton or use the app. • The vacuum-mop will not enter sleep mode while on the charging dock. • The vacuum-mop will automatically turn off afer being in sleep mode for 12 hours. The vacuum-mop has a feature of resuming cleanup. If the vacuum-mop starts running low batery during a cleaning task, it will automatically return to the charging dock to recharge. Once the vacuum-mop is fully charged, it will resume cleanup where it lef off. If the cleaning task is manually ended while the vacuum-mop is charging, cleanup will not be resumed.
Fault Status Zoned Area If the vacuum-mop encounters an error during operation, the indicator will blink red and you will hear a voice alert. To check for a solution, please refer to the Troubleshooting section. If no action is taken within 5 minutes, the vacuum-mop will automatically enter sleep mode. You can use the app to set up the zoned area, then the vacuum-mop will clean up within the zoned area you selected. Clean There You can set a specified area on the map via the app, then the vacuum-mop will automatically navigate to the area and clean a square-shaped area of 2 Ч 2 meters.
Adding Water or Cleaning Mop Pad During Cleaning If you need to add more water to the vacuum-mop or clean the mop pad during a cleaning task, press any buton to pause the vacuum-mop, then remove the 2-in-1 dust compartment with water tank. Afer adding water or cleaning the mop pad, reinstall the 2-in-1 dust compartment with water tank and mop pad, then press the buton to resume the cleaning task. Scheduled Cleanup You can schedule cleaning times in the app. The vacuum-mop will automatically start cleaning at the scheduled times, then return to the charging dock afer the cleaning is completed. Note:
The vacuum-mop will not do the scheduled cleanup during the Do Not Disturb period if Do Not Disturb mode is enabled. Cleaning Preferences Four suction modes are available in the Mi Home/Xiaomi Home app: Silent, Standard, Medium, and Turbo. The default mode is Standard. You can set up virtual walls and restricted areas in the app to prevent the vacuum-mop from entering areas you wish not to clean. Virtual Walls/Restricted Areas Do Not Disturb Mode In the Do Not Disturb mode, the vacuum-mop will not resume cleanup, perform scheduled cleanup, or issue voice alerts. Do Not Disturb Mode is enabled by default and can be disabled via the app.
Smart Mapping You can use the app to enable smart mapping. This allows the vacuum-mop to automatically update its map afer completing a cleaning task and recharging. 08