Connect with Mi Home/Xiaomi Home App This product works with Mi Home/Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app Store to download and install it. Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. Note:
The version of the app might have been updated, please follow the instructions based on the current app version. Reseting Wi-Fi When switching to a new router or changing your Wi-Fi password, you will need to reset the vacuum-mop's Wi-Fi connection. Turn on the vacuum-mop, then simultaneously press and hold the butons and for 3 seconds until you hear a voice saying "Waiting for the network configuration". Once the Wi-Fi connection is successfully reset, you can reconnect the vacuum-mop. Note: Only 2.4 GHz Wi-Fi networks are supported. Restoring Factory Setings Press and hold the buton for 5 seconds.
When you hear a voice saying "Factory setings will be restored", press and hold the buton again for 5 seconds until it says "Restoring factory setings". When the setings are successfully restored, all user data will be cleared, and you will hear a voice saying "Factory setings restored successfully". 09