Installation 1. Connect the charging dock to the power outlet. 3. Place the charging dock on a level ground against a wall. 0.5 meters 0.5 meters 1.5 meters 2. Install the side brush on the upper-lef corner of the vacuum-mop, as shown in the figure. An extra side brush in the package is provided as a spare and does not need to be installed. 4. When using the vacuum-mop for the first time, press and hold the buton for 3 seconds to turn on the vacuum-mop. Once the indicator lights up, manually place the vacuum-mop onto the charging dock to charge. Then just press the buton when the vacuum-mop is cleaning, it will automatically go to the charging dock to recharge. White:
Turned on/Working normally/Fully charged/Wi-Fi Connected Breathing yellow: Charging Blinking red: Error 05