Installing Accessories for Desired Mode Vacuuming and mopping mode: Install 2-in-1 dust compartment with water tank, mop pad holder, and mop pad. Cleanup mode: Install the dust compartment or 2-in-1 dust compartment with water tank. 1. Open the 2-in-1 dust compartment with water tank lid, fill up the tank, then reatach the lid. 1. Open the cover of the vacuum-mop and place the dust compartment or 2-in-1 dust compartment with water tank in the direction shown until it locks into place. 2. Install the 2-in-1 dust compartment with water tank into the vacuum-mop until it locks into place. 3. Atach the mop pad to the holder and press the velcro strips firmly together. 2. Turn on the vacuum-mop.
It is now ready to start cleaning. Mop Pad Mop Pad Holder Velcro Clips 06