How to Use On/Standby Switching mode Enabling & disabling plasma/UV sterilization Tap the on/standby button to turn on the purifier. When the purifier is on, tap the on/standby button to enter standby mode. While the purifier is on, tap the mode switch button to cycle through modes. Tap the plasma on/off button to enable or disable plasma sterilization. Tap and hold the plasma on/off button for seven seconds to enable or disable UV sterilization. Adjusting the display's brightness Resetting Wi-Fi When connecting the purifier to the app for the first time or unable to connect to it, press and hold the display on/off button for 7 seconds.
The purifier will make a notification sound once Wi-Fi is successfully reset. Enabling/disabling the child lock function Press and hold the mode switch button for 7 seconds to enable or disable the child lock function. The purifier will make the corresponding notification sound and show the corresponding icon on the display. Press the display on/off button to cycle through its brightness levels: on, dim, and off. Child Lock Enabled Child Lock Disabled 6