User’s Guide Error Indicators 113 Lights Problem and solution Paper out No paper is loaded. Load paper into the sheet feeder, and then press one of the start x buttons. The product resumes printing and the light goes out. Multiple-paper feed More than one sheet has been fed at a time. Load paper in the sheet feeder correctly and press one of the start x buttons. If the paper remains in the product, see “Paper Jams” on page 119. Paper jam Paper has jammed in the product. & “Paper Jams” on page 119 Ink expended An ink cartridge is expended or not installed, or there is insufficient ink in the cartridge to charge the ink. Replace the ink cartridge for which an error is indicated with a new one.
If the light is still on after you have replaced the cartridge, it may not be installed correctly. Reinstall the ink cartridge so that it clicks into place. & “Replacing an Ink Cartridge” on page 86 Wrong cartridge The currently installed ink cartridge cannot be used with the product. You cannot use the cartridges that came with your product for the replacement. Replace the incompatible cartridge for which an error is indicated with an appropriate ink cartridge. & “Replacing an Ink Cartridge” on page 86 Incorrectly installed ink cartridge An ink cartridge is not installed correctly. Reinsert the ink cartridge for which an error is indicated.
& “An ink error is indicated after you replace the cartridge” on page 130 Ink low An ink cartridge is nearly expended. Obtain a replacement ink cartridge. To determine which cartridge is nearly expended, check the ink cartridge status. & “Checking the Ink Cartridge Status” on page 80 Flashing alternately Maintenance The product’s ink pads are nearing or at the end of their service life. Contact Epson support to replace ink pads. If the product’s ink pads are nearing the end of their service life, printing can be resumed by pressing one of the start x buttons.