User’s Guide Troubleshooting for Printing/Copying Note: If the printer is equipped with a scanner unit support, close the scanner unit as shown below. E Press the button indicated in the LCD screen. For the products without LCD screens: If all the lights on the control panel flash, press the P button to turn the printer off and then on again. If only the P and b lights flash, press x r or r x button. Preventing paper jams If your paper jams frequently, check the following. ❏ The paper is smooth, not curled or wrinkled. ❏ You are using high-quality paper. ❏ The printable side of the paper is face up in the sheet feeder. ❏ The paper stack was fanned before loading.
❏ For plain paper, do not load paper above the line just under the H arrow mark inside the edge guide. For Epson special media, make sure the number of sheets is less than the limit specified for the media. & “Selecting Paper” on page 20 ❏ The edge guides are snug against the edges of the paper. ❏ The product is on a flat, stable surface that extends beyond the base in all directions. The product will not operate properly if it is tilted. Reprinting after a paper jam (for Windows only) After you cancel the print job because of a paper jam, you can reprint it without reprinting pages that have already been printed. A Solve the paper jam. & “Paper Jams” on page 119 122